Pipe Shields Inc. manufactures pre-insulated pipe supports, slides, guides and anchors and is a subsidiary of Piping Technology and Products, Inc.
PT&P manufactured seventy-two bolt cradle pipe supports for a sulphuric acid plant in Canada. The supports are designed for pipes ranging from 1-1/2″ to 20″ in diameter. They are fabricated from carbon steel and coated with a special protective paint for acid service. Standard bolt cradle supports are offered in 2″ to 24″ diameter pipe sizes; however, PT&P can manufacture any size needed for your application.
Read More
112 custom variable springs designed for a furnace application for an oil refinery in Venezuela. The furnace cans are designed from carbon steel and painted with red oxide primer to prevent corrosion when exposed to high temperatures. The sizes of these figures PTP-6 and PTP-8 range in length from 25″- 39″, with a total travel of 0.1″- 1.821″ and loads varying from 430 – 681 lb. A load test to confirm the spring rate was conducted on each assembly prior to shipment.
Read More
Cryogenic pipe supports, ranging in diameter from 6″ to 38″, were designed to support and insulate piping in an LNG receiving and regassification plant. The “cold shoe anchors” were designed for temperatures down to -260°F and a load range of 26,000 lb. to 210,000 lb. A combination of high density polyurethane foam (PUF) and Permali® was used for the insulation. The center stops that are welded to the process pipe were built from 304 stainless steel, and carbon steel was used for the remainder of the shoe.
Do you have a need for cold shoes in your piping system? Get pricing today!
