INSULATED PIPE SUPPORT - REGULAR DUTY WITH EXTENDED INSULATION - A2000 - DETAILS
Download 3D Models
Custom Design Request
REQUEST A QUOTE
Insulated Pipe Support – Regular Duty with Extended Insulation – A2000
General Dimensions & Specifications
Hardware sold separately.
Note: For higher load ratings, see A4000, A9000.
| Oper. Temp. °F |
Mult. Factor “F” |
|---|---|
| 500 | 0.90 |
| 750 | 0.75 |
| 1000 | 0.50 |
| 1200 | 0.30 |
| TABLE III | |
| Pipe Size |
MAXIMUM LOAD RATING (LBS) |
|
|---|---|---|
| On Flat Surface (a) (c) |
In Clevis Hanger (b) (c) |
|
| 1/2 | 35 | 40 |
| 3/4 | 40 | 45 |
| 1 | 60 | 65 |
| 1 1/4 | 70 | 80 |
| 1 1/2 | 100 | 110 |
| 2 | 125 | 140 |
| 2 1/2 | 150 | 200 |
| 3 | 180 | 250 |
| 3 1/2 | 225 | 300 |
| 4 | 270 | 350 |
| 5 | 350 | 450 |
| 6 | 400 | 550 |
| 8 | 450 | 750 |
| 10 | 500 | 1000 |
| 12 | 550 | 1200 |
| 14 | 575 | 1400 |
| 16 | 600 | 1600 |
| 18 | 625 | 1800 |
| 20 | 675 | 2000 |
| 24 | 750 | 2300 |
| TABLE I | ||
Contact factory for other dimensions,
temperatures, and loads.
Available in all insulation thicknesses.
The load ratings represent average values obtained in accordance with accepted
methods and are subject to normal manufacturing variations. Dimensions and ratings
are subject to change without notice.
a) To develop maximum load rating, width of support surface should be at least 1/2 of dimension “A” in Table II.
b) To develop maximum load rating, use band, ring or clevis hanger with manufacturer’s load rating equal to or greater than values shown in Table I.
c) To obtain load ratings for operating temperatures of 500° F and higher, multiply load rating by factor “F” in Table III.
| Iron Pipe Size |
Insulation Thickness | Copper Tubing Size O.D. |
|||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 3/4 | 1 | 1 1/2 | 2 | 2 1/2 | 3 | 3 1/2 | 4 | |||||||||||
| A | B | A | B | A | B | A | B | A | B | A | B | A | B | A | B | A | B | ||
| 1/2 – 1 1/2 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 5/8 – 1 5/8 |
| 2 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 6 | 24 | 2 1/8 |
| 2 1/2 – 4 | 6 | 20 | 6 | 20 | 6 | 20 | 6 | 20 | 6 | 20 | 6 | 20 | 9 | 20 | 9 | 20 | 9 | 20 | 2 5/8 – 4 1/8 |
| 5 | 6 | 20 | 6 | 20 | 6 | 20 | 6 | 20 | 9 | 20 | 9 | 20 | 9 | 20 | 5 1/8 | ||||
| 6 – 7 | 6 | 20 | 6 | 20 | 6 | 20 | 6 | 20 | 9 | 16 | 9 | 16 | 9 | 16 | 6 1/8 | ||||
| 8 – 10 | 9 | 16 | 9 | 16 | 9 | 16 | 9 | 16 | 9 | 16 | 9 | 16 | 8 1/8 – 10 1/8 | ||||||
| 12 – 18 | 12 | 16 | 12 | 16 | 12 | 16 | 12 | 16 | 12 | 16 | 12 | 16 | 12 1/8 | ||||||
| 20 – 24 | 18 | 16 | 18 | 16 | 18 | 16 | 18 | 16 | 18 | 16 | 18 | 16 | |||||||
| TABLE II “B” = gauge of sheet metal jacket | |||||||||||||||||||
Application:
Model A2000
is designed for use on:
Cold water
Chilled water
Intended for installation on:
Flat surfaces
Band, ring or clevis pipe hanger
Temperature Range:
Standard: +40°F to +1200°F CalSil Insulation
Note: Up to 1800°F available upon request.
Cryogenic: -275°F to +275°F Urethane Insulation.
Add U after the model number (i.e., A2000U)
Features:
- Compact
- Easy installation
- Eliminates welding to pipe
- Overlapping galvanized sheet metal jacket
- Minimizes heat loss and/or condensation
- Calcium silicate insulation extends 1” beyond the galvanized sheet metal jacket providing for an easier vapor barrier joint with the pipe insulation
- Copper tubing sizes available
- Other I.D.’s and/or O.D.’s available on request
- Clamps available (see G-series)
- Clevis available (see PTP fig. 83)
Performance test results on file:
Available upon request.
Material Data:
- A2000:
Applicable PSI spec. doc.: No. 205 - Insulation:
Calcium silicate asbestos-free, treated with water repellant - Jackets:
Galvanized steel ASTM A-653 - Glue:
Industrial contact adhesive
Formal submittal sheets available.