Pipe Clamp Tubing Clamp – Neoprene Sleeved – G1200
General Dimensions & Specifications
Contact factory for pipe sizes or insulation thicknesses not shown.
Note: For non-lined clamps, see: G1000 – For bolt-on clamps, see: G2200 – For U-bolts, see: G3000.
Framing channel sold separately.
Easy installation
Rugged
Fits standard 1 5/8″ width framing channel
Sized to clamp on O.D. of bare pipe or bare copper tubing
Vibration isolator
Complete with top bolt and nut
Other sizes available on request
Neoprene sleeve eliminates galvanic action between clamp, framing channel and copper tubing.
G1200: Applicable PSI specification document: No. 208.
Steel: Galvanized Steel 11 ga. x 1 1/4 wide ASTM A-527
Fasteners: ASTM A-307 Plated
Sleeve: 1/4″ thick x 2″ wide closed cell neoprene
Formal Submittal Sheets Available
Model G1200 is designed for use on:
- Cold Water
- Hot Water
- Dual Temperature
- Chilled Water
- Vacuum
- Steam
- Gas
- Air
Intended for Installation on:
- Standard 1-5/8″ width framing channels
Pipe Size | Maximum Lateral Load - Lb. |
3/4 | 50 |
1 | 50 |
1 1/4 | 50 |
1 1/2 | 50 |
2 | 50 |
2 1/2 | 50 |
3 | 50 |
3 1/2 | 50 |
4 | 50 |
5 | 50 |
6 | 50 |
8 | 50 |
10 | 50 |
12 | 50 |
TABLE I |
Copper Tubing O.D. | Maximum Lateral Load lb. |
1 1/8 | 50 |
1 3/8 | 50 |
1 5/8 | 50 |
2 1/8 | 50 |
2 5/8 | 50 |
3 1/8 | 50 |
3 5/8 | 50 |
4 1/8 | 50 |
TABLE II |