Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
  < Back to Pipe Anchors
Model C4000 - Insulated Positive Pipe Anchor
Download PDF
C4000

Dimensions and ratings are subject to change without notice.

The load ratings represent average values obtained in accordance with accepted test methods and are subjected to normal manufacturing variations.

Note: For higher load ratings, see: C4100. If thrust plate thickness "D" is greater than pipe wall thickness, consult factory.

Installation Instructions

Pipe Size
Load Rating
Insul Thk. = 1"
Insul Thk. = 1-1/2"
Insul Thk. = 2"
Insul Thk. = 2-1/2"
Insul Thk. = 3"
Insul Thk. = 4"
Vert. lb.
Axial lb.
B
C
D
E
B
C
D
E
B
C
D
E
B
C
D
E
B
C
D
E
B
C
D
E
1
1 1/2
200
290
410
590
4
4
2
2
0.1875
0.1875
4.125
4.625
4
4
2.5
2.5
0.1875
0.1875
5.125
5.625
4
4
3
4
0.25
0.25
6.187
7.25
4
4
4
4.5
0.25
0.25
7.25
8.25
6
6
4.5
5.5
0.25
0.25
8.25
8.25
6
6
6.5
7.5
0.25
0.25
10.25
11.375
2
2 1/2
3
4
360
440
530
840
730
890
1400 1730
4
4
4
4
2.5
2.5
3
4
0.1875
0.1875
0.1875
0.1875
5.125
5.625
6.187
7.25
4
4
4
4
3
4
4
4.5
0.1875
0.1875
0.25
0.25
6.1875
7.25
7.25
8.25
4
4
4
4
4
4.5
4.5
5.5
0.25
0.25
0.25
0.25
7.25
8.25
8.25
9.25
4
4
4
4
4.5
5.5
5.5
6.5
0.25
0.25
0.3125
0.3125
8.25
9.25
9.25
10.25
6
6
6
6
5.5
6.5
6.5
7.5
0.25
0.25
0.3125
0.3125
9.25
10.25
10.25
11.375
6
6
6
6
7.5
8
8
9
0.3125
0.3125
0.375
0.375
11.375
12.375
12.375
13.375
5
6
8
10
1050
1275
1700
2000
2060
2400
3020
3700
4
4
4
4
4.5
5.5
7.5
9
0.1875
0.1875
0.1875
0.1875
8.25
9.25
11.375
13.625
4
4
4
4
5.5
6.5
8
9.5
0.25
0.25
0.25
0.25
9.25
10.25
12.375
14.875
4
4
4
4
6.5
7.5
9
10.5
0.25
0.25
0.25
0.25
10.25
11.375
13.375
15.875
4
4
6
6
7.5
8
9.5
11
0.3125
0.3125
0.3125
0.3125
11.375
12.375
14.625
16.875
6
6
6
6
8
9
10.5
12
0.3125
0.3125
0.3125
0.3125
12.375
13.375
15.625
17.875
6
6
6
6
9.5
10.5
12
13
0.375
0.375
0.375
0.375
14.625
15.625
17.625
19.875
12
14
16
18
2200
2500
2900
3200
4320
4700
5340
5970
4
4
4
4
10.5
11
12.5
14
0.1875
0.1875
0.1875
0.1875
15.625
16.625
18.625
20.625
4
4
4
4
11
12
13
14.5
0.25
0.25
0.25
0.25
16.875
17.875
19.875
21.875
4
4
6
6
12
12.5
14
15.5
0.25
0.25
0.25
0.25
17.875
18.875
20.875
22.875
6
6
6
6
12.5
13
14.5
16
0.3125
0.3125
0.3125
0.3125
18.875
19.875
21.875
23.875
6
6
6
6
13
14
15.5
16.5
0.3125
0.3125
0.3125
0.3125
19.875
20.875
22.875
24.875
6
6
8
8
14.5
15.5
16.5
18
0.375
0.375
0.375
0.375
21.875
22.875
24.875
26.875
20
24
30
36
42
3400
3600
4700
5500
6200
6600
7850
9740
11600
13500
4
4
4
4
4
15.5
18
22.5
26.5
31
0.1875
0.1875
0.1875
0.1875
0.1875
22.625
26.625
33.125
39.125
45.125
4
4
6
6
6
16
19
23
27.5
31.5
0.25
0.25
0.25
0.25
0.25
23.875
27.875
34.125
40.125
46.125
6
6
6
6
6
16.5
19.5
24
28
32.5
0.25
0.25
0.25
0.25
0.25
24.875
28.875
35.125
41.125
47.125
6
6
6
6
6
17.5
20.5
24.5
28.5
33
0.3125
0.3125
0.3125
0.3125
0.3125
25.875
29.875
36.125
42.125
48.125
6
6
6
6
6
18
21
25
29.5
33.5
0.3125
0.3125
0.3125
0.3125
0.3125
26.875
30.875
37.125
43.125
49.125
8
8
8
8
8
19.5
22.5
26.5
31
35
0.375
0.375
0.375
0.375
0.375
28.875
32.875
39.125
45.125
51.125

 

Application:

Models C4000 through C4030 are designed for use on:

  • Cold Water
  • Hot Water
  • Chilled Water
  • Dual Temperature
  • Steam
  • Air
  • Gas
  • Vacuum
  • Where large axial forces must be resisted

Intended for Installation on:

  • Flat Surfaces

Temperature Range: +40°F to +1200°F

Features

  • All pipe sizes
  • Easy Installation
  • Overlapping galvanized sheet metal jacket
  • Insulating structural inserts for load transfer
  • Other I.D.'s and/or O.D.'s available on request
  • Bottom-of-pipe to top-of-shield matches insulated supports in "B" series

Performance Test Results on File: Available upon request.

Material Data:

  • C4000 - C4030: Applicable PSI spec. doc.: No. 209
  • Steel Inner Thrust Plates (supplied loose):
  • Model C4000: A36 Carbon Steel
  • Model C4010: A387GR.22 Chrome Moly
  • Model C4020: A515GR.70 Carbon Silicon
  • Model C4030: A304L Stainless Steel
  • Jackets: Galvanized Steel ASTM-527
  • Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant
  • Glue: Industrial contact adhesive
  • Steel Straps/Base: Carbon Steel ASTM A-36
  • Fasteners: ASTM A-307 Plated
  • Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available

     

 

 

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy