Sliding Insulated Pipe Support – Heavy Duty, Base Mounted – B3100

Download PDF

Contact factory for other dimensional, temperature, load or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.

The load ratings repesent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

Note: For lesser axial travel, see: B3200 – For lateral restraint, see: B4100 – For lateral travel, see: B5100

All pipe sizes
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Stainless steel to UHMW polyethylene slide
Other I.D.’s and/or O.D.’s available on request
Factory mounted polyethylene slide pad on steel mounting plate

Performance Test Results on File: Available upon request.

B3100: Applicable PSI spec. doc.: No. 209
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTMA-527
Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant
Glue: Industrial contact adhesive
Steel Straps/Base: Carbon Steel ASTM A-36
Fasteners: ASTM A-307 Plated
Slide Pad: UHMW Polyethylene (PTFE Optional)
Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available

Model B3100 is designed for use on:

• Cold Water
• Hot Water
• Dual Temperature
• Chilled Water
• Vacuum
• Steam
• Gas
• Air

Intended for Installation on:

• Flat Surfaces

Temperature Range:

• Standard: +40°F to +1200°F CalSil Insulation
  Note: Up to 1800°F available upon request.
• Cryogenic: -275°F to +275°F Urethane Insulation.
  Add U after the model number (i.e., B3100U)