Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
  < Back to Commercial & Light Industrial Types
Model A7000 - Insulated Pipe Support - Heavy Duty with Load Bearing Plate
Download PDF Download PDF
a7000 Model Insulated Pipe Support
Oper. Temp°F
Mult. Factor "F"
500
750
1000
1200
.90
.75
.50
.30
Table II

Hardware Sold Separately - Note: For higher load ratings, see A7200. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, width of support surface should be at least 1/2 of dimension "B" in Table I.

Installation Instructions

Pipe Size
Maximum Load Rating (lb.)
A
B
C
On Flat Surface (a)
2 1/2
3
3 1/2
250
300
350
6
6
6
3
3
3
1/4
1/4
1/4
4
5
6
400
500
550
6
6
6
3
3
3
1/4
1/4
1/4
8
10
12
700
875
1600
6
9
9
3
6
6
1/4
3/8
3/8
14
16

18
1650
1850
2000
9
9
9
6
6
6
3/8
1/2
1/2
20
24
30
2100
2300
2500
9
9
9
6
6
6
1/2
3/4
3/4
36
42
2500
2500
9
9
6
6
3/4
3/4
TABLE I

Application:

Model A7000 is designed for use on:

  • Cold Water
  • Hot Water
  • Chilled Water
  • Dual Temperature
  • Vacuum
  • Steam
  • Gas
  • Air

Intended for Installation on:

  • Flat Surfaces
  • Pipe Rolls, see A8200
  • Clevis Hangers, see A9000

Temperature Range: +40°F to +1200°F

Note: Up to 1800°F available upon request.

Features

  • Compact
  • Easy Installation
  • Eliminates welding to pipe
  • Overlapping galvanized sheet metal jacket
  • Insulating structural inserts for load transfer
  • Minimizes heat loss and/or condensation
  • Load distribution plate integral with bottom jacket
  • Copper tubing sizes available
  • Other I.D.'s and/or O.D.'s available on request

Performance Test Results on File: Available upon request.

Material Data:

  • A7000: Applicable PSI spec. doc.: No. 205
  • Insulation: Calcium Silicate asbestos-free, treated with water repellant.
  • Jackets: Galvanized Steel ASTMA-527
  • Load Distribution Plate: Carbon Steel ASTM A-36
  • Coating: Primer coated or hot-dip galvanized
  • Glue: Industrial contact adhesive

Formal Submittal Sheets Available

 

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy