Insulated Pipe Support – With Load Distribution Plate – A5000

Download PDF

Hardware Sold Separately – Note: For higher load ratings, see A7000. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, width of support surface should be at least 1/2 of dimension “B” in Table I. To obtain load ratings for operating temperatures of 500°F and higher, multiply load rating by factor “F” in Table II.

Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat loss and/or condensation
Load distribution plate integral with bottom jacket
Copper tubing sizes available
Other I.D.’s and/or O.D.’s available on request

Performance Test Results on File: Available upon request.

• A5000: Applicable PSI spec. doc.: No. 205
• Insulation: Calcium Silicate asbestos-free, treated with water repellant.
• Jackets: Galvanized Steel ASTMA-527
• Load Distribution Plate: Carbon Steel ASTM A-36
• Coating: Primer coated or hot-dip galvanized
• Glue: Industrial contact adhesive

Formal Submittal Sheets Available

Model A5000 is designed for use on:

• Cold Water
• Hot Water
• Dual Temperature
• Chilled Water
• Vacuum
• Steam
• Gas
• Air

Intended for Installation on:

• Flat Surfaces
• Pipe Rolls

Temperature Range:

• Standard: +40°F to +1200°F CalSil Insulation
  Note: Up to 1800°F available upon request.
• Cryogenic: -275°F to +275°F Urethane Insulation.
  Add U after the model number (i.e., A5000U)