Pipe Supports are Now Available on Amazon!

July 23, 2021

Need a standard product quickly? Or know what you need and don’t need a quote? Pick it up on Amazon and skip the communication…

*If you need assistance, we are always available 24×7 via our emergency service or just send an email to [email protected]. You can also chat with us during business hours via the chat button on the lower-left of the screen.

 

Ptp fig30 forgedcsturnbuckle
Fig. 30 Forged Carbon Steel Turnbuckle
Ptp fig60 heavy 2 bolt pipe clamp
Fig. 60 Heavy Two-Bolt Pipe Clamp
Ptp fig70 light 3 bolt pipe clamp
Fig. 70 Light Three-Bolt Pipe Clamp
Ptp fig80 heavy 3 bolt pipe clamp
Fig. 80 Heavy Three-Bolt Pipe Clamp
Ptp fig90 riser clamp
Fig. 90 Riser Clamp
Ptp fig100 long tangent u bolt
Fig. 100 Long Tangent U-Bolt
Read More

Bolt Cradle Supports with Slide Plates Designed for a Combined Cycle Facility

July 14, 2014

Bolt Cradle Supports with Slide Plates Designed for a Combined Cycle Facility

PT&P custom designed Fig. 900 bolt cradle supports with slide plates in 3 weeks for a combined cycle facility in Virginia. The supports are fabricated from carbon steel with a hot-dipped galvanized finish. They are 20″ long and range from 1’2-3/8″ to 1’6-7/8″ in height. The cradle supports are designed for an operating temperature range from 300°F to 530°F and are capable of supporting loads ranging from 1,340 lb. to 3,774 lb. with 0.05″ to 3.33″ of axial movement.

Read More

72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

December 30, 2013

72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

PT&P manufactured seventy-two bolt cradle pipe supports for a Sulphuric Acid Plant in Canada. The supports are designed for pipes ranging from 1-1/2″ to 20″ in diameter. They are fabricated from carbon steel and coated with a special protective paint for acid service. Standard bolt cradle supports are offered in 2″ to 24″ diameter pipe sizes; however, PT&P can manufacture any size needed for your application.

Read More
Top