Insulated Pipe Support – Regular Duty – A1000

Download PDF

Hardware Sold Separately – Note: For higher load ratings, see A3000, A9000. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, width of support surface should be at least 1/2 of dimension “A” in Table II. To develop maximum load rating, use band, ring or clevis hanger with manufacturer’s load rating equal to or greater than values shown in Table I.

To obtain load ratings for operating temperatures of 500°F and higher, multiply load rating by factor “F” in Table III.

Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat loss and/or condensation
Copper tubing sizes available
Other I.D.’s and/or O.D.’s available on request
Clamps available (see G-Series)
Performance Test Results on File: Available upon request.

A1000: Applicable PSI spec. doc.: No. 205
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTMA-527
Glue: Industrial contact adhesive

Formal Submittal Sheets Available

Model A1000 is designed for use on:

• Cold Water
• Hot Water
• Dual Temperature
• Chilled Water
• Vacuum
• Steam
• Gas
• Air

Intended for Installation on:

• Flat Surfaces
• Band, ring or clevis pipe hanger

Temperature Range:

• Standard: +40°F to +1200°F CalSil Insulation
  Note: Up to 1800°F available upon request.
• Cryogenic: -275°F to +275°F Urethane Insulation.
  Add U after the model number (i.e., A1000U)