Pipe Clamp Tubing Clamp Neoprene Sleeved - G2200 - Details
Request A Quote
Pipe Clamp Tubing Clamp Neoprene Sleeved – G2200
General Dimensions & Specifications
Contact factory for pipe sizes or tube sizes not shown.
Note: For non-lined clamps, see: G2000 – For U-bolts, see: G3000.
Framing channel sold separately.
Easy installation
Rugged
Fits standard 1 5/8″ width framing channel
Sized to clamp on O.D. of bare pipe or bare copper tubing.
Vibration isolator
Complete with top bolt and nut plus (2) tie down bolts and channel nuts with springs
Other sizes available on request
Neoprene sleeve eliminates galvanic action between clamp, framing and copper tubing.
G2200: Applicable PSI specification document: No. 208.
Steel: ASTM A36 1/4 X 1 1/2
Fasteners: ASTM A-307 Plated
Coating: Primer coating or hot dipped galvanized. Other coatings available upon request.
Formal Submittal Sheets Available
Model G2200 is designed for use on:
- Cold Water
- Hot Water
- Dual Temperature
- Chilled Water
- Vacuum
- Steam
- Gas
- Air
Intended for Installation on:
- Standard 1-5/8″ width framing channels
| Pipe Size | Maximum Lateral Load - Lb. |
| 3/4 | 200 |
| 1 | 200 |
| 1 1/4 | 200 |
| 1 1/2 | 200 |
| 2 | 400 |
| 2 1/2 | 400 |
| 3 | 400 |
| 3 1/2 | 400 |
| 4 | 400 |
| 5 | 400 |
| 6 | 400 |
| 8 | 400 |
| 10 | 400 |
| 12 | 400 |
| TABLE I | |
| Copper Tubing O.D. | Maximum Lateral Load - lb. |
| 1 1/8 | 200 |
| 1 3/8 | 200 |
| 1 5/8 | 200 |
| 2 1/8 | 400 |
| 2 5/8 | 400 |
| 3 1/8 | 400 |
| 3 5/8 | 400 |
| 4 1/8 | 400 |
| TABLE II | |