Insulated Friction Pipe Anchor – C3000

Download PDF

Dimensions and ratings are subject to change without notice.

The load ratings represent average values obtained in accordance with accepted test methods and are subjected to normal manufacturing variations.

Note: For higher load ratings, see: C3100, C4000.

All pipe sizes
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.’s and/or O.D.’s available on request
Bottom-of-pipe to top-of-shield matches insulated supports in “B” series

Performance Test Results on File: Available upon request.

C3000: Applicable PSI spec. doc.: No. 209
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTM-527
Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant
Glue: Industrial contact adhesive
Steel Straps/Base: Carbon Steel ASTM A-36
Fasteners: ASTM A-307 Plated
Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available

Model C3000 is designed for use on:

• Cold Water
• Hot Water
• Dual Temperature
• Chilled Water
• Vacuum
• Steam
• Gas
• Air
• Where thermal cycle are infrequent
• Where axial forces are relatively light or in balance

Intended for Installation on:

• Flat Surfaces

Temperature Range:

• Standard: +40°F to +1200°F CalSil Insulation
  Note: Up to 1800°F available upon request.
• Cryogenic: -275°F to +275°F Urethane Insulation.
  Add U after the model number (i.e., C3000U)