Insulated Pipe Riser Clamps for Downward Loads - E1100 - Details
Request A Quote Form
Insulated Pipe Riser Clamps for Downward Loads – E1100
General Dimensions & Specifications
a. If thrust plate thickness “B” is greater than pipe wall thickness, consult factory.
b. One pair thrust plates supplied loose for field welding, top only.
Note: For higher load ratings, see: E1200.
All pipe sizes
Easy Installation
Positive stop – axially downward.
May be supported from below or above.
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.’s and/or O.D.’s available on request
Eliminates condensation sweating on chilled water risers
Performance Test Results on File: Available upon request.
E1100 – E1130 : Applicable PSI spec. doc.: No. 206
Steel Top Thrust Plates
Model E1100: A25 Carbon-Steel
Model E1110: A387 Gr.11 Chrome-Moly
Model E1120: A515 Gr.70 Carbon Silicon
Model E1130: A304L Stainless Steel
Insulation: Calcium Silicate – Asbestos-free, treated with a water repellant.
Jackets: Galvanized Steel ASTM-527
Glue: Industrial contact adhesive
Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant.
Steel Straps: Carbon Steel ASTM A-36
Fasteners: ASTM A-307 Plated
Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.
Formal Submittal Sheets Available
Model E1100 through E1130 is designed for use on:
- Cold Water
- Hot Water
- Dual Temperature
- Chilled Water
- Vacuum
- Steam
- Gas
- Air
Intended for Installation on:
- Vertical runs of insulated pipe with downward load only.
Other:
- For handling both upward and downward loads, see E2100
Temperature Range:
- Standard: +40°F to +1200°F CalSil Insulation
Note: Up to 1800°F available upon request. - Cryogenic: -275°F to +275°F Urethane Insulation.
Add U after the model number (i.e., E1100U)
| Iron Pipe Size | (a) load lb. | A | B | C | D | E | Insul Thk. = 1" | Insul Thk. = 2" | Insul Thk. = 3" | Insul Thk. = 4" | ||||||||
| F | G | H | F | G | H | F | G | H | F | G | H | |||||||
| 2 | 500 | 0.63 | 0.38 | 0.38 x 3.00 | 1.5 | 0.625 | 3.94 | 6.19 | 5.38 | 5 | 7.25 | 7.5 | 6 | 8.25 | 9.5 | 7.06 | 9.31 | 11.63 |
| 2 1/2 | 600 | 0.63 | 0.38 | 0.38 x 3.00 | 1.5 | 0.625 | 4.19 | 6.44 | 5.88 | 5.5 | 7.75 | 8.5 | 6.5 | 8.75 | 10.5 | 7.56 | 9.81 | 12.63 |
| 3 | 800 | 0.63 | 0.38 | 0.38 x 3.00 | 1.5 | 0.625 | 4.47 | 6.72 | 6.44 | 5.5 | 7.75 | 8.5 | 6.5 | 8.75 | 10.5 | 7.56 | 9.81 | 12.63 |
| 4 | 1200 | 0.63 | 0.38 | 0.38 x 3.00 | 1.5 | 0.625 | 5 | 7.25 | 7.5 | 6 | 8.25 | 9.5 | 7.06 | 9.31 | 11.63 | 8.06 | 10.31 | 13.63 |
| 5 | 1600 | 0.63 | 0.38 | 0.38 x 4.00 | 2 | 0.625 | 5.5 | 7.75 | 8.5 | 6.5 | 8.75 | 10.5 | 7.56 | 9.81 | 12.63 | 8.69 | 10.94 | 14.88 |
| 6 | 2000 | 0.63 | 0.38 | 0.38 x 4.00 | 2 | 0.625 | 6 | 8.25 | 9.5 | 7.06 | 9.31 | 11.63 | 8.06 | 10.31 | 13.63 | 9.19 | 11.44 | 15.88 |
| 8 | 2600 | 0.63 | 0.5 | 0.50 x 4.00 | 2 | 0.625 | 7.31 | 9.81 | 11.88 | 8.31 | 10.81 | 13.88 | 9.44 | 11.94 | 16.13 | 10.44 | 12.94 | 18.13 |
| 10 | 3200 | 0.88 | 0.5 | 0.50 x 5.00 | 3 | 0.625 | 8.31 | 10.81 | 13.88 | 9.44 | 11.94 | 16.13 | 10.44 | 12.94 | 18.13 | 11.44 | 13.94 | 20.13 |
| 12 | 3400 | 0.88 | 0.5 | 0.50 x 5.00 | 3 | 0.625 | 9.44 | 11.94 | 16.13 | 10.44 | 12.94 | 18.13 | 11.44 | 13.94 | 20.13 | 12.44 | 14.94 | 22.13 |
| 14 | 4000 | 0.88 | 0.5 | 0.50 x 5.00 | 3 | 0.75 | 10.06 | 12.69 | 17.13 | 11.06 | 13.69 | 19.13 | 12.06 | 14.69 | 21.13 | 13.06 | 15.69 | 23.13 |
| 16 | 4600 | 0.88 | 0.5 | 0.50 x 6.00 | 4 | 0.75 | 11.06 | 13.69 | 19.13 | 12.06 | 14.69 | 21.18 | 13.06 | 15.69 | 23.13 | 14.06 | 16.69 | 25.13 |
| 18 | 5000 | 0.88 | 0.5 | 0.50 x 6.00 | 4 | 0.75 | 12.06 | 14.69 | 21.13 | 13.06 | 15.69 | 23.13 | 14.06 | 16.69 | 25.13 | 15.06 | 17.69 | 27.13 |
| 20 | 5400 | 0.88 | 0.5 | 0.50 x 6.00 | 4 | 0.75 | 13.06 | 15.69 | 23.13 | 14.06 | 16.69 | 25.13 | 15.06 | 17.69 | 27.13 | 16.06 | 18.69 | 29.13 |
| 24 | 5600 | 0.88 | 0.5 | 0.50 x 6.00 | 4 | 0.75 | 15.06 | 17.69 | 27.13 | 16.06 | 18.69 | 29.13 | 17.06 | 19.69 | 31.13 | 18.06 | 20.69 | 33.13 |