Home
Products
Insulated Pipe Riser Clamps for Downward Loads – E1000

Insulated Pipe Riser Clamps for Downward Loads – E1000

Insulated Pipe Riser Clamps for Downward Loads - E1000 - Details

General Information
Features
Material Data
Applications
Insulation Thickness Table
Selection Guide
Installation Guide

Request A Quote

Download PDF

a. If thrust plate thickness “B” is greater than pipe wall thickness, consult factory.

b. One pair thrust plates supplied loose for field welding, top only.

Note: For higher load ratings, see: E1100.

All pipe sizes
Easy Installation
Positive stop – axially downward.
May be supported from below or above.
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.’s and/or O.D.’s available on request
Eliminates condensation sweating on chilled water risers

Performance Test Results on File: Available upon request.

E1000 – E1030 : Applicable PSI spec. doc.: No. 206
Steel Top Thrust Plates
Model E1000: A25 Carbon-Steel
Model E1010: A387 Gr.11 Chrome-Moly
Model E1020: A515 Gr.70 Carbon Silicon
Model E1030: A304L Stainless Steel
Insulation: Calcium Silicate – Asbestos-free, treated with a water repellant.
Jackets: Galvanized Steel ASTM-527
Glue: Industrial contact adhesive
Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant.
Steel Straps: Carbon Steel ASTM A-36
Fasteners: ASTM A-307 Plated
Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available

Model E1000 through E1030 is designed for use on:

Cold Water
Hot Water
Dual Temperature
Chilled Water
Vacuum
Steam
Gas
Air

Intended for Installation on:

Vertical runs of insulated pipe with downward load only.

Other:

For handling both upward and downward loads, see E2000

Temperature Range:

Standard: +40°F to +1200°F CalSil Insulation
Note: Up to 1800°F available upon request.
Cryogenic: -275°F to +275°F Urethane Insulation.
Add U after the model number (i.e., E1000U)

Iron Pipe Size	(a) load lb.	A	B	C	D	E	Insul Thk. = 1"			Insul Thk. = 2"			Insul Thk. = 3"			Insul Thk. = 4"
Iron Pipe Size	(a) load lb.	A	B	C	D	E	F	G	H	F	G	H	F	G	H	F	G	H
2	250	0.63	0.25	0.25 x 3.00	1.5	0.625	3.69	5.69	5.13	4.75	6.75	7.25	5.75	7.75	9.25	6.81	8.81	11.38
2 1/2	300	0.63	0.25	0.25 x 3.00	1.5	0.625	3.94	5.94	5.63	5.25	7.25	8.25	6.25	8.25	10.25	7.31	9.31	12.38
3	400	0.63	0.25	0.25 x 3.00	1.5	0.625	4.22	6.22	6.19	5.25	7.25	8.25	6.25	8.25	10.25	7.31	9.31	12.38
4	600	0.63	0.25	0.25 x 3.00	1.5	0.625	4.75	6.75	7.25	5.75	7.75	9.25	6.81	8.81	11.38	7.81	9.81	13.38
5	800	0.63	0.25	0.25 x 3.00	1.5	0.625	5.25	7.25	8.25	6.25	8.25	10.25	7.31	9.31	12.38	8.44	10.44	14.63
6	1000	0.63	0.25	0.25 x 4.00	2	0.625	5.75	7.75	9.25	6.81	8.81	11.38	7.81	9.81	13.38	8.94	10.94	15.63
8	1300	0.63	0.25	0.25 x 4.00	2	0.625	6.81	8.81	11.38	7.81	9.81	13.38	8.94	10.94	15.63	9.94	11.94	17.63
10	1600	0.63	0.38	0.38 x 5.00	3	0.625	8.06	10.31	13.63	9.19	11.44	15.88	10.19	12.44	17.88	11.19	13.44	19.88
12	1700	0.63	0.38	0.38 x 5.00	3	0.625	9.19	11.44	15.88	10.19	12.44	17.88	11.19	13.44	19.88	12.19	14.44	21.88
14	2000	0.88	0.38	0.38 x 5.00	3	0.625	9.69	11.94	16.88	10.69	12.94	18.88	11.69	13.94	20.88	12.69	14.94	22.88
16	2300	0.88	0.38	0.38 x 5.00	3	0.625	10.69	12.94	18.88	11.69	13.94	20.88	12.69	14.94	22.88	13.69	15.94	24.88
18	2500	0.88	0.38	0.38 x 5.00	3	0.625	11.69	13.94	20.88	12.69	14.94	22.88	13.69	15.94	24.88	14.69	16.94	26.88
20	2700	0.88	0.38	0.38 x 5.00	3	0.625	12.69	14.94	22.88	13.69	15.94	24.88	14.69	16.94	26.88	15.69	17.94	28.88
24	2800	0.88	0.38	0.38 x 5.00	3	0.625	14.69	17.19	26.88	15.69	18.19	28.88	16.69	19.19	30.88	17.69	20.19	32.88

Top Request A Quote