Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
  < Back to Insulated Riser Clamps
Model E2200 - Insulated Pipe Riser Clamps for Upward or Downward Loads

a. If thrust plate thickness "B" is greater than pipe wall thickness, consult factory.

b. One pair thrust plates supplied loose for field welding, top only.

Note: For higher load ratings, see: E2300.

Installation Instructions

Iron Pipe Size
load lb.
A
B
C
D
E
Insul Thk. = 1"
Insul Thk. = 2"
Insul Thk. = 3"
Insul Thk. = 4"
F
G
H
F
G
H
F
G
H
F
G
H
2
2 1/2
3
4
750
900
1200
1800
0.63
0.63
0.63
0.63
0.50
0.50
0.50
0.50
0.50 x 3.00
0.50 x 3.00
0.50 x 3.00
0.50 x 4.00
1.50
1.50
1.50
2.00
0.625
0.625
0.625
0.625
4.19
4.44
4.72
5.25
6.19
6.44
6.72
7.25
5.63
6.13
6.69
7.75
5.25
5.75
5.75
6.25
7.25
7.75
7.75
8.25
7.75
8.75
8.75
9.75
6.25
6.75
6.75
7.31
8.25
8.75
8.75
9.31
9.75
10.75
10.75
11.88
7.06
7.56
7.56
8.31
9.31
9.81
9.81
10.31
11.88
12.88
12.88
13.88
5
6
8
10
2400
3000
3900
4800
0.63
0.88
0.88
0.88
0.50
0.50
0.50
0.50
0.50 x 4.00
0.50 x 5.00
0.50 x 5.00
0.50 x 6.00
2.00
3.00
3.00
4.00
0.625
0.625
0.625
0.75
5.75
6.25
7.31
8.44
7.75
8.25
9.31
10.69
8.75
9.75
11.88
13.88
6.75
7.31
8.31
9.56
8.75
9.31
10.31
11.81
10.75
11.88
13.88
16.13
7.81
8.31
9.44
10.56
9.81
10.31
11.44
12.81
312.88
13.88
16.13
18.13
8.94
9.44
10.44
11.56
10.94
11.44
12.44
13.81
15.13
16.13
18.13
20.13
12
14
16
18
5100
6000
6900
7500
1.13
1.13
1.13
1.13
0.50
0.50
0.50
0.50
0.50 x 6.00
0.50 x 6.00
0.50 x 7.00
0.50 x 7.00
4.00
4.00
5.00
5.00
0.75
0.75
0.88
0.88
9.56
10.06
11.19
12.19
11.81
12.31
13.44
14.44
16.13
17.13
19.13
21.13
10.56
11.06
12.19
13.19
12.81
13.31
14.44
15.44
18.13
19.13
21.13
23.13
11.56
12.06
13.19
14.19
13.81
14.31
15.44
16.44
20.13
21.13
23.13
25.13
12.56
13.06
14.19
15.19
13.81
14.81
15.31
17.44
22.13
23.13
25.13
27.13
20
24
8100
8400
1.13
1.13
0.50
0.50
0.50 x 7.00
0.50 x 7.00
5.00
5.00
0.88
0.88
13.19
15.19
15.44
17.69
23.13
27.13
14.19
16.19
16.44
18.69
25.13
29.13
15.19
17.19
17.44
19.69
27.13
31.13
16.19
18.19
18.44
20.69
29.13
33.13

Application:

Model E2200 through E2230 are designed for use on:

  • Cold Water
  • Hot Water
  • Chilled Water
  • Dual Temperature
  • Steam
  • Air
  • Gas
  • Vacuum

Intended for installation on:

  • vertical runs of insulated pipe with upward and/or downward load.

Other:

  • For handling downward loads only, see E1200.

Temperature Range: +40°F to +1200°F, up to 1800°F available upon request

Features

  • All pipe sizes
  • Easy Installation
  • Positive stop - axially downward.
  • May be supported from below or above.
  • Overlapping galvanized sheet metal jacket
  • Insulating structural inserts for load transfer
  • Other I.D.'s and/or O.D.'s available on request
  • Eliminates condensation sweating on chilled water risers

Performance Test Results on File: Available upon request.

Material Data:

  • E2200 - E2230 : Applicable PSI spec. doc.: No. 206
  • Steel Top Thrust Plates
  • Model E2200: A25 Carbon-Steel
  • Model E2210: A387 Gr.11 Chrome-Moly
  • Model E2220: A515 Gr.70 Carbon Silicon
  • Model E2230: A304L Stainless Steel
  • Insulation: Calcium Silicate - Asbestos-free, treated with a water repellant.
  • Jackets: Galvanized Steel ASTM-527
  • Glue: Industrial contact adhesive
  • Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant.
  • Steel Straps: Carbon Steel ASTM A-36
  • Fasteners: ASTM A-307 Plated
  • Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available

     

 

 

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy