Insulated Pipe Support – With Load Distribution Plate with Extended Insulation – A6000

Download PDF

Hardware Sold Separately – Note: For higher load ratings, see A7000. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, width of support surface should be at least 1/2 of dimension “B” in Table I. To obtain load ratings for operating temperatures of 500°F and higher, multiply load rating by factor “F” in Table II.

Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat loss and/or condensation
Load distribution plate integral with bottom jacket
Calcium silicate insulation extends 1″ beyond the galvanized sheet metal jacket providing for an easier vapor barrier joint with the pipe
Copper tubing sizes available
Other I.D.’s and/or O.D.’s available on request

Performance Test Results on File: Available upon request.

A6000: Applicable PSI spec. doc.: No. 205
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTMA-527
Load Distribution Plate: Carbon Steel ASTM A-36
Coating: Primer coated or hot-dip galvanized
Glue: Industrial contact adhesive

Formal Submittal Sheets Available

Model A6000 is designed for use on:

• Cold Water
• Chilled Water

Intended for Installation on:

• Flat Surfaces
• Pipe Rolls

Temperature Range:

• Standard: +40°F to +1200°F CalSil Insulation
  Note: Up to 1800°F available upon request.
• Cryogenic: -275°F to +275°F Urethane Insulation.
  Add U after the model number (i.e., A6000U)