Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
  < Back to Commercial & Light Industrial Types
Model A6000 - Insulated Pipe Support - With Load Distribution Plate with Extended Insulation
Download PDF Download PDF

a6000 Model Insulated Pipe Support
Oper. Temp°F
Mult. Factor "F"
500
750
1000
1200
.90
.75
.50
.30
Table II

Hardware Sold Separately - Note: For higher load ratings, see A7000. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, width of support surface should be at least 1/2 of dimension "B" in Table I. To obtain load ratings for operating temperatures of 500°F and higher, multiply load rating by factor "F" in Table II.

Installation Instructions

Pipe Size
Maximum Load Rating (lb.)
A
B
C
Max. Axial Travel (inches) on Pipe Roll +/-
On Flat Surface (a) (c)
On Pipe Roll (b) (d)
2 1/2
3
3 1/2
200
250
300
180
225
270
9
9
9
6
6
6
1/4
1/4
1/4
2
2
2
4
5
6
350
450
500
315
400
450
9
9
9
6
6
6
1/4
1/4
1/4
2
2
2
8
10
12
625
650
925
550
575
825
9
9
12
6
6
9
1/4
1/4
3/8
2
2
3
14
16

18
1000
1100
1200
900
975
1075
12
12
12
9
9
9
3/8
1/2
1/2
3
3
3
20
24
30
1300
1400
1500
1150
1250
1350
12
12
12
9
9
9
1/2
3/4
3/4
3
3
3
36
42
1500
1500
1350
1350
12
12
9
9
3/4
3/4
3
3
TABLE I

Application:

Model A6000 is designed for use on:

  • Cold Water
  • Chilled Water

Intended for Installation on:

  • Flat Surfaces
  • Pipe Rolls

Temperature Range: +40°F to +1200°F

Note: Up to 1700°F available upon request.

Features

  • Compact
  • Easy Installation
  • Eliminates welding to pipe
  • Overlapping galvanized sheet metal jacket
  • Minimizes heat loss and/or condensation
  • Load distribution plate integral with bottom jacket
  • Calcium silicate insulation extends 1" beyond the galvanized sheet metal jacket providing for an easier vapor barrier joint with the pipe
  • Copper tubing sizes available
  • Other I.D.'s and/or O.D.'s available on request

Performance Test Results on File: Available upon request.

Material Data:

  • A6000: Applicable PSI spec. doc.: No. 205
  • Insulation: Calcium Silicate asbestos-free, treated with water repellant.
  • Jackets: Galvanized Steel ASTMA-527
  • Load Distribution Plate: Carbon Steel ASTM A-36
  • Coating: Primer coated or hot-dip galvanized
  • Glue: Industrial contact adhesive

Formal Submittal Sheets Available

 

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy