Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
 

Frequently Asked Questions

How long does it take to install an insulated pipe support?

This depends upon the size and model considered. The popular commercial and light industrial supports up through 8” pipe size can generally be installed by one man in half-a-minute or less. The two halves, with their overlapping jackets, merely slip together over the pipe at the point of support. If for any reason, the support must be relocated, it is just as easy to remove and move, as it was to install in the first place. The larger the diameter, heavy industrial supports may require the time of two men for 15 minutes plus a welder to attach the base plate to the support structure. As with the small bore commercial supports, these too are easy to relocate. For more information about installation, visit our installation guide page.

Feield Service

Members of our field service team.

Back to FAQ main page

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy